Bosch Kiox 300 Retrofit kit Smart System
Bosch e-bike Kiox 300 display (BHU3600)
This item is the Kiox 300 display for the Bosch SmartSystem and display arm.
The smart display for sporty rides
Kiox 300 is the ideal display for the smart system and an intelligent, robust companion for sporty rides. It can be operated intuitively via the LED Remote or the Mini Remote, is compact and offers an easy-to-read splash-proof and dust-proof colour display. Fully connected in the smart system, it continuously receives new functions through the eBike Flow app.
Also available: protective cover
Small but mighty. Kiox 300 pleases not only with its compact size, but also with a colour display that is optimally readable by day and night. Operating it is simple and is visually supported by animations and images. The handy display underlines the clean eBike look and is protected against splash water and dust.
No more tedious pushing. The new Walk Assist feature can be activated via the LED remote and provides helpful assistance on tricky climbs. Kiox 300 provides clear, visual guidance and facilitates intuitive operation. In order to better assess with which riding mode the destination can be reached, Kiox 300 clearly displays the remaining range for all modes.
The one-armed display holder allows for centralised positioning of the display on the handlebar and is adapted to the personal needs of the user. The tilt angle of the display can also be individually adjusted – for optimum readability during ride.
NEW: in conjunction with the eBike Flow app, Kiox 300 offers a clear, minimalist navigation function.
Includes:
- Kiox 300
- 1-Arm socket EB13100005 or EB13100006
- Display Interface rear plug (BDS3210) EB1310000A
- Display cable 300mm (BCH3611_300) EB1212000A
- Operating and installation instructions
Retrofitting if LED Remote or Purion 200 is on the bike
Is there an LED Remote or Purion 200 installed on your eBike? The retrofit kit contains all that you need. Just select the correct size for your handlebars - check your bikes's specification online for size (31.8mm or 35mm).
What to do:
- Select the correct handlebar diameter and order the corresponding Display Mount Kit.
- You can find out how to mount the display mount on the handlebar in the operating instructions.
- Unplug the existing cable from the LED Remote or your Purion 200. Now plug one end of the new, short display cable into the vacated socket. Insert the other end into the display interface. It doesn't matter which socket you choose.
- Now plug the free end of the cable into the second socket of the display interface.
You can now place your Kiox 500, Kiox 300 or SmartphoneGrip onto the display interface.
Note: The retrofit kit is only available with the mount where the cables are plugged into the back of the mount, (towards the rider). If you prefer to have the cables exit from the front you will need to purchase the Front Plug
Retrofitting if only the System Controller and Mini Remote are currently on the bike
Is there a System Controller with Mini Remote installed on your eBike? With the right cables, the right display mount (Display Mount Kit) and a little installation skill, you can use the Kiox 500, Kiox 300 or SmartphoneGrip displays.
Order the retrofit kit for your bar size and then order an additional Display Cable
What to do:
- Select the correct handlebar diameter and order the corresponding Display Mount Kit.
- Order an additional display cable of the appropriate length. You can easily measure this yourself: from the position of the display mount to the System Controller.
- Mount the display mount on the handlebar by referring to the operating instructions.
- Loosen the screw of the System Controller and pull it out of the top tube. Unplug the existing cable from the System Controller, feed it through the frame and plug it into one of the two sockets on the display mount.
- Plug the additional display cable into the second socket of the display mount and route it to the System Controller.
- Secure the System Controller with the screw. You can now place your Kiox 500, Kiox 300, or SmartphoneGrip onto the display interface.
Note 1: To be able to use the functions of the displays, you need a Mini Remote or Mini Remote Dropbar, depending on the handlebar. You can simply connect it via Bluetooth.
Note 2: The default mounting plug has cables exit towards the rider. If you prefer to have the cables exit at the top the purchase the Front facing Plug
