EBFEC Ares electric bike | Horizon Micromobility
EBFEC Ares electric bike | Horizon Micromobility
EBFEC Ares electric bike | Horizon Micromobility
EBFEC Ares electric bike | Horizon Micromobility
EBFEC Ares electric bike | Horizon Micromobility
EBFEC Ares electric bike | Horizon Micromobility
EBFEC Ares electric bike | Horizon Micromobility
EBFEC Ares electric bike | Horizon Micromobility
EBFEC Ares electric bike | Horizon Micromobility
EBFEC Ares electric bike | Horizon Micromobility
EBFEC Ares electric bike | Horizon Micromobility
EBFEC Ares electric bike | Horizon Micromobility
EBFEC Ares electric bike | Horizon Micromobility
EBFEC Ares electric bike | Horizon Micromobility
EBFEC Ares electric bike | Horizon Micromobility
EBFEC Ares electric bike | Horizon Micromobility
Ares electric bike
Ares electric bike
Ares electric bike

Ares electric bike

Regular price £1,395.00 Sale price£875.00
  • Low stock - 2 items left
  • Please contact us for ETA

🚴🏽‍♂️ Test rides available
Add to basket


✅ Comfortable upright riding position
✅ 5 levels of assistance from motor
✅ Rear rack and front light
✅ Battery hidden in frame
✅ Front & rear disc brakes
✅ Mudguard, front light, kick stand
👉 Book a test ride HERE

The Ares electric bike is ideally suited to the commuter, shopper or for those wanting to explore further from home.

Please note white Ares has 37mins on the clock (used for a test ride) but it as new.

With its comfortable upright riding position, front light and rear rack never has commuting and popping to the shops been as fun as this. 

The Ares is powered by a rear hub motor that provides power assistance up to the UK legal limit of 25km/h (15.5mph).

The Ares has 7 gears and 5 levels of assist from the motor. Select 4-5 for hills, 2-3 for the flats or 0-1 if you're looking to get some exercise.

The integrated (removable) 36V, 7Ah, 250Wh Samsung, LG or Panasonic battery provides enough power to give an estimated 40-50 miles range. And should the battery run out you'll be able to ride the bike as a conventional bike. Read our guide on batteries & range here.

With integrated cables and a range of colours the stylish Ares will put a smile on any rider's face.

The Ares is manufactured in Europe, in a modern, purpose built factory in Poland. 

The bike comes partially assembled leaving just the front mudguards, rack, handlebar, seat and pedals to be fitted. If you would prefer us to deliver and assemble the bike for you then get in touch. 

Frame size 52cm, suitable for riders 160-190cm, 5'3"- 6'3", full frame sizing available on Specification Tab. If unsure of sizing get in touch with us for advice and/or compare sizing with existing bike, you can "fine tune" sizing by adjusting seat height and adjusted the handle bar height and reach.

✅ European made: Comprehensive warranty & European based support network
✅ Branded battery: Supplied with Samsung, LG or Panasonic battery
✅ Ideal commuter electric bike: Fitted with rear rack & front light
✅ Motor: Shengyi 36V, 250W rear hub motor
✅ Controller: 5 assist speeds
Frame Geometry: Check full specification on "Specification Chart" tab below
✅ Brakes: Front & rear disc brakes
✅ Sensor: Torque Sensor
✅ Wheel Sizes: 700c
✅ Max Speed: 25km/h, 15.5mph
Max Range: 50km (depending on rider, assist setting, terrain, temp)

Want to see before you buy, then get in touch

Horizon Micromobility: specialists in the e-commuting/leisure market, our advisors are available on chat, email and phone to answer your questions. As well as our low prices, with our post sales service you have access to an extensive spares network, workshop facility and friendly staff.

EBFEC e-bikes are covered by a one year, back to base warranty to original owner. The warranty covers all the basic components in the electrical system, such as the motor, battery, controller and charger as well as the frame, brakes and every component except the ones specified as components that are consumables subject to natural wear and tear.

Items not covered. Damage to the bicycle or components caused by a fall, incorrect or abusive use of the bike or exceeding the maximum weight limit. Corrosion caused by improper storage. Modifications of the electrical system and repairs carried out by an unauthorised dealer.

Components, which are subject to natural wear and tear (grips, bells, Tyres, inner tubes, cassette, chain, saddle, brake pads, etc).

We offer a no quibble 30 day refund policy 👍

Read our full returns/refund policy here

Express Shipping available. See shipping policy for more details 🚚

Specification - Ares Geometry
Battery Hidden Battery, Samsung/LG/Panasonic, lithium battery 36V, 7.0Ah Frame Size(mm): 520
Motor Shengyi 36V, 250W, 40Nm
brushless rear hub motor
Wheel Size/Tyre Size: 700c /35mm
Charger 100-240V, 36V, 2A Seat tube(mm): 520
Charging Time 3.5hrs Seat tube angle: 70º
Display LCD display Head tube length(mm): 160
Frame & Fork Aluminium Head Angle: 73º
Lights Front light Effective top tube: 573
Cassette & Chainring 7 speed, 14-28T cassette, 44T chainring Bottom Bracket Height: 291
Brakes Front & rear disc brake Bottom bracket drop: 55
Shift Levers 7 speed Chainstay length: 475
Sensor Type Torque sensor Offset: 45
Max Speed 15.5 mph / 25km/h (UK legal limit) Stem extension: 90
Bike: approx 18kgs
Delivered box dimensions: 146x77x25cm
Wheelbase (mm): 1090
Max load 120kg Standover (mm): 878
Available Colours Black, White, Grey, Blue Frame reach (mm): 377
EBFEC Ares electric bike
These assembly instructions are for customers who are looking to assemble the Ares electric bike themselves. We're also able to offer a personalised delivery and assembly service, simply add this option to your order.
Before you assemble the Ares electric bike you will need a few tools 🛠
Cup of tea or coffee ☕️
Cable cutters (for cutting cable ties) 
Allen or hex key set (3, 4, 5, 6mm) 
10 and 15mm spanner 🔧
    ebfec ares electric bike tools for assembly
    Carefully lift out the Ares electric bike and contents from the box.
    Using a pair of cable cutters remove the cable ties securing the front wheel to the frame, DON'T USE a knife as it's easy to slip and scratch the frame.
    Carefully remove the front wheel noting that the crank is positioned inside the wheel spokes.
    Fit the front wheel in the forks by carefully making sure the brake rotor is located in the callipers. Add the securing washer making sure it's located in the hole in the fork and tighten the nut with a 15mm spanner.
      ebfec ares front wheel assembly
      Release the remaining cables ties that are securing the rear rack and handlebars to the bike frame.
      Locate the headset cover and cable tidy "thingy" in the accessories box. This fits over the headset, (see photo below).
        ebfec electric bike head set cover cap
        Add handlebar assembly to frame, (see photo below).
          ebfec ares electric bike handle bar assembly
          Once the handlebar assembly is roughly at the correct height, remove rubber cap and tighten the headset, (see photo below).
            ebfec ares headset tightening
            The angle of the handlebar assembly can be adjusted by opening the lever and adjusting the height to suit. Close the lever and check for movement in the handlebars, if the lever is too tight to close, or if when closed there is movement in the handlebar then the barrel adjuster can be adjusted by inserting an Allen key and turning the barrel adjuster. Moving from right to left tightens, (photo below).
              ebfec ares handle bar tightening
              The actual handlebar can also be tilted up/down by releasing the grub screw (see photo below) located under the handlebar and by releasing the barrel adjuster, once rotated to the desired angle tighten the grub screw and adjust the barrel adjuster back to create a tight fit.
                ebfec ares handle bar tightening
                Tidy the cables by locking in the headset cover, (see photo below).
                  ebfec ares electric bike front light
                  Remove front light assembly using a 5mm Allen key and 10mm spanner.
                  The front mudguard feeds through the fork from the rear with the mounting bracket at the front of the mudguard, (see photos below).
                  Install the front light but now also add the mudguard to the screw before the nut is added, (see photo below).
                    ebfec ares electric bike mudguard
                    ebfec ares electric bike front light
                    Add the mudguard mounting stays to the frame using 4mm Allen key.
                    Add pannier to frame using 3mm Allen key.
                      rear pannier rack mounting ebec ares electric bike
                      Add seat post to frame and tighten using a 6mm Allen key, make sure seat is horizontal, adjust if required.
                      Add pedals, and tighten with a 15mm spanner, noting that the left pedal is reverse thread so turn counter clockwise to tighten.
                        ebfec electric scooter pedals
                        Finally pump up the tyres.
                        CONGRATULATIONS your new electric bike is ready to go.
                        Once assembled the rider can fine tune the fit by adjusting the seat height as well as seat fore and aft positioning. The handlebar height, angle and rotation can also be fine tuned.
                        250W rear hub motor

                        Providing 5 levels of assistance up to 25km/h

                        Front & Rear disc brakes

                        Why buy an e-bike from us?

                        FREE SERVICING

                        When you buy an eBike from us you will receive 12 months of free servicing

                        free LAKA ebike insurance

                        FREE EBIKE INSURANCE

                        FREE EBIKE INSURANCE

                        Shackle 14 Pro Duo U-lock & cable

                        30% OFF ANY Oxford Lock

                        Protect your investment, add a lock to your order and get 30% off



                        Bought X8 scooter .
                        Excellent product is robust and fit for purpose does about 15-18 miles on high speed , more on lower settings this bearing in mind I am 16 1/2 stone so I am sure would do much more if lighter !!!
                        Excellent service
                        Excellent communication from Seller .

                        100% recommend .

                        John L
                        Scunthorpe, UK

                        Purchase was hassle free whole process was easy and delivery was super quick, post-sale experience was good.

                        Rob M
                        Cheltenham, UK

                        Horizon Micromobility are a very pleasant company to do business with.
                        I was able to choose a method of payment that suited me, their customer service is excellent, both friendly and professional, goods were delivered on time by a decent courier service (and a decent courier service is a deciding factor - I wouldn't buy products from a company that uses a courier that just throws boxes over the fence!).
                        These guys will be my first port of call when buying myself a scooter :)

                        Tina I
                        Peterborough, UK

                        Very happy customer. Really pleased with the e-scooter I purchased from Horizon Micromobility, very quick turnaround on the delivery, ordered Wednesday, received Friday just in time to have a go on my new purchase for the weekend. I would definitely recommend using this company if they have the product you are looking for.


                        I am in love with this machine!
                        Being a larger gent and having recently developed mobility issues I decided that an e-scooter was a good 1/2 way house between my old self and a mobility scooter.
                        I have always been fit and partaken of sports requiring balance (skiing, cycling etc) but i also come in at 6 foot 4 and 19 stone. So I needed something big and strong to take me up the hills which have recently become my bete noir!
                        Horizon Micromobility helped me to make the right decision and i am beyond delighted with my new machine which has reopened areas which had, sadly, become beyond my range. Remember it is not necessarily about the journey but it is always about the destination!
                        I honestly cannot recommend these guys enough. they are friendly, knowledgeable and extremely helpful and flexible.

                        Charles M
                        Docklands, London, UK

                        Customer service is the best I've had, ever I think.
                        Was kept in the loop throughout the process.
                        Staff are very friendly.
                        Would absolutely use this company again.
                        Thank you all very much indeed!

                        Peter H
                        Peterculter, Scotland, UK
                        OUR CUSTOMER CARE GUARANTEE

                        ✔️ Access to extensive spares
                        ✔️ Cytech trained mechanics
                        ✔️ Workshop facilities
                        ✔️ UK backed warranty

                        Visit us

                        Get in touch to arrange a visit to our Hare Hatch, Reading showroom & warehouse. See before you buy and test rides available.

                        Recently viewed