Bosch Retrofit Kit Display 1-ARM holder SMART SYSTEM (BDSYYYY)
Part Number: EB13900012
Bosch retrofit kit for Bosch Smartsystem. The kit includes all the parts required to add the display arm to your ebike's handlebars.
If your Bosch Smartsystem ebike currently uses the Bosch LED remote or Bosch System Controller then this Bosch Retrofit kit will allow you to mount the Bosch Kiox 300, Bosch Kiox 500 or Bosch Smartphone Grip. If upgrading from the System Controller then you will also need a longer connecting cable.
The retrofit kit includes rear facing plugs, if you wish front facing you will also need part number: EB13100009
Once mounted, you can easily use the Bosch Kiox 300, Bosch Kiox 500 or the SmartphoneGrip holder on your e-bike.
Cable exits mount from the bottom.
This item is in stock.
Includes:
- 1-Arm socket EB13100005 or EB13100006
- Display Interface rear plug (BDS3210) EB1310000A
- Display cable 300 mm (BCH3611_300) EB1212000A
- Operating and installation instructions
Items my be delivered in retrofit reatail packaging or order may be composed of individual items depending on stock - the items are the same
Retrofitting if LED Remote or Purion 200 is on the bike
Is there an LED Remote or Purion 200 installed on your eBike? The retrofit kit contains all that you need. Just select the correct size for your handlebars - check your bikes's specification online for size (31.8mm or 35mm).
What to do:
- Select the correct handlebar diameter and order the corresponding Display Mount Kit.
- You can find out how to mount the display mount on the handlebar in the operating instructions.
- Unplug the existing cable from the LED Remote or your Purion 200. Now plug one end of the new, short display cable into the vacated socket. Insert the other end into the display interface. It doesn't matter which socket you choose.
- Now plug the free end of the cable into the second socket of the display interface.
You can now place your Kiox 500, Kiox 300 or SmartphoneGrip onto the display interface.
Note: The retrofit kit is only available with the mount where the cables are plugged into the back of the mount, (towards the rider). If you prefer to have the cables exit from the front you will need to purchase the Front Plug
Retrofitting if only the System Controller and Mini Remote are currently on the bike
Is there a System Controller with Mini Remote installed on your eBike? With the right cables, the right display mount (Display Mount Kit) and a little installation skill, you can use the Kiox 500, Kiox 300 or SmartphoneGrip displays.
Order the retrofit kit for your bar size and then order an additional Display Cable
What to do:
- Select the correct handlebar diameter and order the corresponding Display Mount Kit.
- Order an additional display cable of the appropriate length. You can easily measure this yourself: from the position of the display mount to the System Controller.
- Mount the display mount on the handlebar by referring to the operating instructions.
- Loosen the screw of the System Controller and pull it out of the top tube. Unplug the existing cable from the System Controller, feed it through the frame and plug it into one of the two sockets on the display mount.
- Plug the additional display cable into the second socket of the display mount and route it to the System Controller.
- Secure the System Controller with the screw. You can now place your Kiox 500, Kiox 300, or SmartphoneGrip onto the display interface.
Note 1: To be able to use the functions of the displays, you need a Mini Remote or Mini Remote Dropbar, depending on the handlebar. You can simply connect it via Bluetooth.
Note 2: The default mounting plug has cables exit towards the rider. If you prefer to have the cables exit at the top the purchase the Front facing Plug
