Bosch Kiox 500 retrofit kit Bosch SmartSystem
Bosch e-bike Kiox 500 retrofit kit
This item is the Kiox 500 display, display arm , mount and cable for the Bosch SmartSystem. This is direct replacement for Kiox 300 or can be added to the LED remote.
Also available: Protective cover
Bosch Kiox 500 Display, as good as the Kiox 300 but BIGGER. Provides you with an even better overview of your e-bike and ride data. The 2.8" display is easy to read in every situation and provides acoustic feedback when needed. Thanks to the universal Kiox single-arm holder upgrading to the Kiox 500 or changing the display as needed is simple – ensuring you are always perfectly equipped on the go.
FEATURES OF THE KIOX 500 DISPLAY
- Large, high-resolution eBike display
- 40% larger than the Kiox 300
- Display can be customised via Flow App
- Navigation via smartphone
- Acoustic feedback
- Can be combined with Purion 200
MORE DISPLAY FOR MORE RIDING FUN WITH THE BOSCH KIOX 500
The impressive display of the Kiox 500 offers sufficient space to present all the important ride data clearly for you. Especially in hectic city traffic, in strong sunlight or on rough descents, the large Kiox 500 shows its strengths. In combination with the eBike Flow app from Bosch, you can customise the different displays individually. With your paired smartphone, you can also navigate safely towards your destination. At the end of your tour or in case of missed turns, the Kiox 500 provides acoustic alerts.
| Drive system: | Bosch drive |
| Manufacturer: | Bosch |
| Bosch System: | Bosch Active Line Plus Smart System (BDU334Y), Bosch Active Line Smart System (BDU332Y), Bosch Cargo Line Gen4 Smart System (BES3), Bosch Performance Line CX Gen4 Smart System (BES3), Bosch Performance Line CX Race Gen4 Smart System (BES3), Bosch Performance Line Gen3 Smart System (BES3), Bosch Performance Line SX Smart System (BDU31) |
| Item: | Bosch Kiox 500 Display, Bracket, Cable and Mount |
| Contents |
|
| Colour: | black |
| Display: | Colour display |
| Compatibility: | Bosch eBikes with Smart System Drive |
Retrofitting if LED Remote or Purion 200 is on the bike
Is there an LED Remote or Purion 200 installed on your eBike? The retrofit kit contains all that you need. Just select the correct size for your handlebars - check your bikes's specification online for size (31.8mm or 35mm).
What to do:
- Select the correct handlebar diameter and order the corresponding Display Mount Kit.
- You can find out how to mount the display mount on the handlebar in the operating instructions.
- Unplug the existing cable from the LED Remote or your Purion 200. Now plug one end of the new, short display cable into the vacated socket. Insert the other end into the display interface. It doesn't matter which socket you choose.
- Now plug the free end of the cable into the second socket of the display interface.
You can now place your Kiox 500, Kiox 300 or SmartphoneGrip onto the display interface.
Note: The retrofit kit is only available with the mount where the cables are plugged into the back of the mount, (towards the rider). If you prefer to have the cables exit from the front you will need to purchase the Front Plug
Retrofitting if only the System Controller and Mini Remote are currently on the bike
Is there a System Controller with Mini Remote installed on your eBike? With the right cables, the right display mount (Display Mount Kit) and a little installation skill, you can use the Kiox 500, Kiox 300 or SmartphoneGrip displays.
Order the retrofit kit for your bar size and then order an additional Display Cable
What to do:
- Select the correct handlebar diameter and order the corresponding Display Mount Kit.
- Order an additional display cable of the appropriate length. You can easily measure this yourself: from the position of the display mount to the System Controller.
- Mount the display mount on the handlebar by referring to the operating instructions.
- Loosen the screw of the System Controller and pull it out of the top tube. Unplug the existing cable from the System Controller, feed it through the frame and plug it into one of the two sockets on the display mount.
- Plug the additional display cable into the second socket of the display mount and route it to the System Controller.
- Secure the System Controller with the screw. You can now place your Kiox 500, Kiox 300, or SmartphoneGrip onto the display interface.
Note 1: To be able to use the functions of the displays, you need a Mini Remote or Mini Remote Dropbar, depending on the handlebar. You can simply connect it via Bluetooth.
Note 2: The default mounting plug has cables exit towards the rider. If you prefer to have the cables exit at the top the purchase the Front facing Plug
